How To Fix A Metal Sliding Door Off Track

Use a wire brush to clean off the dirt or debris.

How to fix a metal sliding door off track.

Remove a door by lifting and tilting the bottom out. Lubricate the rollers but not the track because lubricant will act as a magnet for dust. Once the door is approximately under the hole in the track release the pivot. Parts for these doors are readily available at home centers hardware stores or online.

Open the door about half way lift it straight up and pull the bottom toward yourself until it is free of the track. Is your sliding glass door hard to open and close. Then hold the spring loaded top pivot down while you swing the top of the door toward the frame and under the door track. Grab the door from both sides and lift it off the track.

Begin by inserting the bottom pivot into the bracket which can be screwed to the floor to the door jamb or both. It may be time to replace the track. Place a blanket or rug onto the floor and lay the door onto it for a safe spot. Products used in this video.

Whether your door is unhinged from the top or bottom angle it at 15 to 30 degrees away from the unhinged track and slowly pull it outwards from the closet. Take the flat head screwdriver and insert it into the track channel using it to loosen any dirt or debris that may be present. Remove the door from the track. 6 sliding glass door track product code.

Step 2 prepare the door completely open your sliding patio door. If a malfunctioning sliding door is a chronic problem see if the track is dirty. If a roller is stuck unscrew and remove it. If you have a sliding closet door that glides on a bottom track clean the track with a damp cloth to ensure smooth gliding.

Keep a firm grip on both edges of the door while. If your patio door track is physically broken so that the metal is ripped or worn away it is time to consider a universal replacement kit.