How to install sliding wardrobe doors by spacemaker wardrobes.
How to fit sliding wardrobe door tracks.
2 position bottom track on the floor.
Whether you re fitting sliding doors for a built in wardrobe or as a room partition our range includes a number of styles and finishes.
2 mark this on your top and bottom track sets minus 2mm taking off 2mm allows for an easier fit.
Do not fix yet.
Next install the top track then the bottom track if your doors have one.
For fitting recessed tracks for sliding doors or room dividers follow the same method described above for installing sliding wardrobe doors prior to laying ceramic floor tiles.
1 measure the width at the top and bottom of your opening.
Opening height reducer reduce your height from 127mm to 457mm.
Adjust door position adjust door position by means of a philips screwdriver and the adjusting bolts in the bottom rollers so that the doors fit tightly against the wall along the entire length.
Fit the sliding doors onto the track as follows.
Tilt the doors and carefully insert the top wheels into the rear channel of the top track.
To fit sliding wardrobe doors start by using a hacksaw to cut the tracks that hold the doors in place to size.
Because sliding doors don t fold out the way bifold doors do they allow access to only half the width of the opening at a time.
Instructions on how to fit the soft close mechanism to the doors and top track is included in your installation kit as per your wardrobe style.
Before you start adjusting the wheels up and down ensure all of the doors are correctly inserted into both the top and bottom track and the underside of the doors are not touching the bottom track.
If your opening space is too large then don t worry.
Doors closing left or right should be adjusted to suit the angle they close against to avoid gaps when the doors are closed.
Maintaining sliding closet doors.
Position door on both sides of the track and level up.
Door to floor clearance is adjustable between 10 and 40 mm 2 to 32 mm from the bottom track.
Sliding closet doors operate on rollers that are positioned in tracks at the top jamb and floor allowing the doors to bypass each other in the tracks.
Creating your sliding wardrobe doors couldn t be simpler.
Do this by insert door into back channel of top and.
Once the tracks are in lift the top of the rear sliding door into the rear track guide at a slight angle then tilt the bottom in place so the rollers align.
Installing the sliding doors.
Installation over linoleum flooring vinyl flooring or vinyl floor tiles.